Data Monitor
WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
Input/output signal of A/C auto amp. can be checked.
Display item list
MONITOR ITEMS DESCRIPTION CHART
| Monitor item [Unit] | Description | |
|---|---|---|
| AMB TEMP SEN | [°C (°F)] | Ambient temperature value converted from ambient sensor signal received from ambient sensor |
| IN-VEH TEMP | [°C (°F)] | In-vehicle temperature value converted from in-vehicle sensor signal received from in-vehicle sensor |
| INT TEMP SEN | [°C (°F)] | Evaporator fin temperature value converted from intake sensor signal received from intake sensor |
| SUNLOAD SEN | [w/m2 ] | Sunload value converted from sunload sensor signal received from sunload sensor |
| AMB SEN CAL | [°C (°F)] | Ambient temperature value calculated by A/C auto amp. |
| IN-VEH CAL | [°C (°F)] | In-vehicle temperature value calculated by A/C auto amp. |
| INT TEMP CAL | [°C (°F)] | Evaporator fin temperature value calculated by A/C auto amp. |
| SUNL SEN CAL | [w/m2 ] | Sunload value calculated by A/C auto amp. |
| COMP REQ SIG | [On/Off] | Displays A/C ON signal ON/OFF status transmitted to ECM. |
| FAN REQ SIG | [On/Off] | Displays blower fan ON signal ON/OFF status transmitted to ECM. |
| FAN DUTY | Duty ratio of blower motor judged by A/C auto amp. | |
| XM | Target discharge air temperature judged by A/C auto amp. depending on the temperature setting and the value from each sensor | |
| ENG COOL TEMP | [°C (°F)] | Engine coolant temperature signal value received from ECM via CAN communication |
| VEHICLE SPEED | [km/h (mph)] | Vehicle speed signal value received from combination meter via CAN communication |