Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> EX35 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Interior Lighting System (CROSSCABRIOLET)) >> Removal And Installation >> Step Lamp >> Replacement >> Step Lamp Bulb

Step Lamp Bulb

WARNING: This page is about a different car, the 2011 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove step lamp. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove lens.

    Disengage lens fixing pawls using a remover tool (A), and then remove lens.

    Fig 1: Removing Step Lamp
    G07132652Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Remove bulb.