Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> EX35 Base, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System >> DTC/Circuit Diagnosis >> DTC P1610: Lock Mode >> Diagnosis Procedure

Diagnosis Procedure

  1. CHECK ENGINE START FUNCTION
    1. Perform the check for DTC except DTC P1610.
    2. Use CONSULT-III to erase DTC after fixing.
    3. Turn ignition switch OFF.
    4. Turn ignition switch ON when registered Intelligent Key insert into key slot and wait for 5 seconds.
    5. Return the ignition switch OFF and wait 5 seconds.
    6. Repeat steps 4 and 5 twice (total of 3 cycles).
    7. Check that engine can start when registered Intelligent Key insert into key slot.

      INSPECTION END

scientia non olet · About Mike's Workshop Manuals