Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2011 >> EX35 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Driver Assistance System (BSW) >> DTC/Circuit Diagnosis >> DTC U1000: Can Comm Circuit >> BSW Control Module >> BSW CONTROL MODULE : Diagnosis Procedure

BSW CONTROL MODULE : Diagnosis Procedure

  1. PERFORM THE SELF-DIAGNOSIS
    1. Turn the ignition switch ON.
    2. Turn the BSW system ON, and then wait for 2 seconds or more.
    3. Perform "All DTC Reading" with CONSULT-III.
    4. Check if the "U1000" is detected as the current malfunction in "Self Diagnostic Result" of "BSW".

    Is "U1000" detected as the current malfunction? 

    YES: Refer to "TROUBLE DIAGNOSIS FLOW CHART ".

    NO: Refer to "INTERMITTENT INCIDENT ".

scientia non olet · About Mike's Workshop Manuals