Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2010 >> M35 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Engine Control System - DTCS U0101 To P0159) >> DTC P0139, P0159 Ho2S2 >> CONSULT-III Reference Value in Data Monitor Mode

CONSULT-III Reference Value in Data Monitor Mode

WARNING: This page is about a different car, the 2010 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.

Specification data are reference values.

DATA MONITOR MODE CHART

MONITOR ITEM CONDITION SPECIFICATION
HO2S2 (B1)
HO2S2 (B2)		 Revving engine from idle to 3, 000 RPM quickly after the following conditions are met.
  • Engine: After warming up
  • Keeping the engine speed between 3, 500 and 4, 000 RPM for 1 minute and at idle for 1 minute under no load
 0 - 0.3 V ↔ Approx. 0.6 - 1.0 V
HO2S2 MNTR (B1)
HO2S2 MNTR (B2)		 LEAN ↔ RICH
scientia non olet · About Mike's Workshop Manuals