DTC Confirmation Procedure: Notes
WARNING: This page is about a different car, the 2010 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test.
- Turn ignition switch OFF and wait at least 10 seconds.
- Turn ignition switch ON.
- Turn ignition switch OFF and wait at least 10 seconds.
TESTING CONDITION:
- For best results, perform at ambient temperature of -10°C (14°F) or higher .
- For best results, perform at engine coolant temperature of -10°C (14°F) to 56°C (133°F) .
- Before performing the following procedure, do not add fuel .