Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2010 >> M35 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Engine Control System - DTCS U0101 To P0159) >> DTC P0102, P0103 MAF Sensor >> CONSULT-III Reference Value in Data Monitor Mode

CONSULT-III Reference Value in Data Monitor Mode

WARNING: This page is about a different car, the 2010 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.

Specification data are reference values.

DATA MONITOR MODE CHART

MONITOR ITEM CONDITION SPECIFICATION
MAS A/F SE-B1 See "INSPECTION PROCEDURE ".
CAL/LD VALUE
  • Engine: After warming up
  • Selector lever position: P or N
  • Air conditioner switch: OFF
  • No load
 Idle 14 - 33%
2, 500 RPM 12 - 25%
MASS AIRFLOW
  • Engine: After warming up
  • Selector lever position: P or N
  • Air conditioner switch: OFF
  • No load
 Idle 2.0 - 6.0 g.m/s
2, 500 RPM 7.0 - 20.0 g.m/s
scientia non olet · About Mike's Workshop Manuals