Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Power Window Control System) >> On-Vehicle Repair >> Power Window Main Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2010 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the power window main switch finisher (2) from the door finisher LH. Refer to "REMOVAL AND INSTALLATION ".
  2. Using a screwdriver (A), remove the power window main switch (1) screws, then release from the finisher (2).
    Fig 1: Removing Power Window Main Switch Screws Using Screwdriver
    G05382409Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals