Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Power Window Control System) >> On-Vehicle Repair >> Front Power Window Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2010 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front power window switch finisher (2) from the front door finisher RH. Refer to "REMOVAL AND INSTALLATION ".

    ◦ : Pawl

  2. Using a suitable tool (A), release the tabs and remove the front power window switch (1).
    Fig 1: Identifying Front Power Window Switch With Finisher
    G05382410Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals