Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 344 (Engine Control System (MR16DDT) - Juke - Introduction & DTC Index) >> System Description >> System >> Starter Motor Drive Control >> STARTER MOTOR DRIVE CONTROL : System Description >> Input/Output Signal Chart

Input/Output Signal Chart

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
INPUT/OUTPUT SIGNAL CHART

Sensor Input signal to ECM ECM function Actuator
Crankshaft position sensor (POS)
  • Engine speed
  • Piston position
 Starter motor drive control
  • BCM(1)
  • IPDM E/R

    (Starter relay & starter control relay)
Camshaft position sensor (PHASE)
Engine coolant temperature sensor Engine coolant temperature
Accelerator pedal position sensor Accelerator pedal position
Transmission range switch Gear position
Stop lamp switch Brake pedal position
Combination meter CAN communication Vehicle speed signal
(1) With Intelligent Key system
scientia non olet · About Mike's Workshop Manuals