Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 344 (Engine Control System (MR16DDT) - Juke - Introduction & DTC Index) >> System Description >> System >> Integrated Control System >> INTEGRATED CONTROL SYSTEM : System Description >> CVT models

CVT models

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.

System Description 

TCM transmits a drive mode select signal to ECM via CAN communication, according to a NORMAL mode signal, SPORT mode signal, or ECO mode signal received from the multi display unit via CAN communication. ECM controls torque and throttle opening angle characteristics appropriate for each mode, based on a received drive mode select signal.

NOTE:
  • Because of the multi display unit operation, the display may indicate that the mode is switching. However, the mode may not actually switch due to CAN communication error.
  • When a CAN communication error occurs between ECM and TCM, the mode switches to NORMAL mode.
scientia non olet · About Mike's Workshop Manuals