Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 344 (Engine Control System (MR16DDT) - Juke - Introduction & DTC Index) >> System Description >> System >> Fuel Pressure Control >> FUEL PRESSURE CONTROL : System Description >> Input/Output Signal Chart

Input/Output Signal Chart

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
INPUT/OUTPUT SIGNAL CHART

Sensor Input signal to ECM ECM function Actuator
Crankshaft position sensor (POS) Engine speed(1) Fuel rail pressure control High pressure fuel pump
Exhaust valve timing control position sensor Camshaft position
Fuel rail pressure sensor Fuel rail pressure
Engine coolant temperature sensor Engine coolant temperature
Throttle position sensor Throttle position
Accelerator pedal position sensor Accelerator pedal position
Battery Battery voltage(1)
(1) ECM determines the start signal status by the engine speed signal and battery voltage.