Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 344 (Engine Control System (MR16DDT) - Juke - Introduction & DTC Index) >> Basic Inspection >> G Sensor Calibration >> Description

G Sensor Calibration: Description

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.

ECM stores calibration data (inherent characteristic value) of G sensor to provide accurate control. Therefore, it is required to perform calibration of G sensor after the following work is performed.

scientia non olet · About Mike's Workshop Manuals