Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 265 (Security Control System) >> With Intelligent Key System >> DTC/Circuit Diagnosis >> DTC B2196: Dongle Unit >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE
    1. Turn ignition switch ON.
    2. Turn ignition switch OFF.
    3. Turn ignition switch ON.
    4. Check DTC in "Self-diagnosis result" mode of "BCM" using CONSULT-III.

      Is the DTC detected? 

      YES: Refer to , "DIAGNOSIS PROCEDURE ".

      NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals