Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Brake Control System (With VDC)) >> DTC/Circuit Diagnosis >> DTC C1176: Stop Lamp SW2 >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2011 Nissan Juke. However, it is still accessible from the selected car via links, so may be relevant.
DTC DETECTION CONDITION AND POSSIBLE CAUSES

DTC Display item Malfunction detected condition Possible cause
C1176 STOP LAMP SW2 When brake pedal position switch signal is not input when brake pedal operates.
  • Harness or connector
  • Brake pedal position switch
  • ABS actuator and electric unit (control unit)
  • Ignition power supply system
scientia non olet · About Mike's Workshop Manuals