Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 179 (Brake Control System) >> Removal And Installation >> Steering Angle Sensor >> Removal and Installation >> Installation

Removal and Installation: Installation

WARNING: This page is about a different car, the 2011 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

CAUTION: After installation of the spiral cable, adjust steering angle sensor. Refer to "ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION : SPECIAL REPAIR REQUIREMENT ".
scientia non olet · About Mike's Workshop Manuals