Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 158 (Power Window Control System) >> On-Vehicle Repair >> Front Power Window Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2010 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front power window switch finisher (2) from the front door finisher RH. Refer to "REMOVAL AND INSTALLATION ".
    Fig 1: Identifying Tabs, Front Power Window Switch And Finisher
    G06607088Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Release the four tabs (A), two on each side, then separate the front power window switch (1) from the finisher (2).
scientia non olet · About Mike's Workshop Manuals