Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Audio, Visual & Navigation System) >> Basic Audio Without Navigation >> On-Vehicle Repair >> Display Unit >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2010 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove Cluster lid C. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the display unit screws (A).
  3. Pull out the display unit (1), then disconnect the display unit connectors and remove the display unit (1).
    Fig 1: Identifying Display Unit And Display Unit Screws
    G05714647Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Remove the A/C auto amp. screws (A), remove the (C103) fasteners (B) from the display unit assembly brackets and remove the A/C auto amp. (1).
  5. Remove the display unit bracket unit screws (C) and remove the display unit brackets (2).
    Fig 2: Identifying A/C Auto Amp., A/C Auto Amp.Screws And Display Unit Brackets
    G05714648Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals