Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2010 >> G37 Base, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTC P100A Through P2A03 >> DTC P1091: VVEL Actuator Motor Relay >> Component Inspection

Component Inspection

  1. CHECK VVEL ACTUATOR MOTOR RELAY
    1. Turn ignition switch OFF.
    2. Remove VVEL actuator motor relay.
    3. Check the continuity between VVEL actuator motor relay terminals under the following conditions.
      TERMINAL CONTINUITY REFERENCE CHART

      Terminal Condition Continuity
      3 and 5 12 V direct current supply between terminals 1 and 2 Existed
      No current supply Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace VVEL actuator motor relay.

      Fig 1: VVEL Actuator Motor Relay Circuit
      G05733502Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals