Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2010 >> FX35 AWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt Control System >> Ecu Diagnosis >> Pre-Crash Seat Belt Control Unit >> Fail Safe >> Driver Side

Driver Side

FAIL-SAFE TABLE

Display contents of CONSULT-III Fail-safe
B2451:SEAT BLT MTR DR CIRC Stop the operation in the conditions as per the following.
  • Emergency braking is applied
  • Intelligent brake assist is activated
  • Steering wheel is steered sharply
  • Seat belt fastened
  • Seat belt unfastened
  • Door opens
B2452:SEAT BLT MTR AS CIRC Stops the operation in the conditions as per the following.
  • Emergency braking is applied
  • Intelligent brake assist is activated
  • Steering wheel is steered sharply
  • Seat belt fastened
  • Seat belt unfastened
B2453:BR_STROKE_SEN_CIRC Stops the operation in the conditions as per the following.
  • Emergency braking is applied
  • Seat belt unfastened
B2454:SEAT BLT PWR DR CIRC Stops the operation in the conditions as per the following.
  • Emergency braking is applied
  • Intelligent brake assist is activated
  • Steering wheel is steered sharply
  • Seat belt fastened
  • Seat belt unfastened
  • Door opens
B2455:CONTROL UNIT DR Stops the operation in the conditions as per the following. (1)
  • Emergency braking is applied
  • Intelligent brake assist is activated
  • Steering wheel is steered sharply
  • Seat belt fastened
  • Seat belt unfastened
  • Door opens
B2456:SEAT BLT PWR AS Stops the operation in the conditions as per the following.
Seat belt unfastened
B2457:CONTROL UNIT AS Stops the operation in the conditions as per the following.
Seat belt unfastened
B2458:LOCAL COMM Stops the operation in the conditions as per the following.
Seat belt unfastened
B2461:VHCL SPEED SIGNAL Stops the operation in the conditions as per the following.
  • Emergency braking is applied
  • Steering wheel is steered sharply
  • Seat belt fastened
  • Seat belt unfastened
B2462:VHCL DISTANCE SIGNAL Stops the operation in the conditions as per the following.
  • Intelligent brake assist is activated
  • Seat belt unfastened
B2466:DR/AS CONTROL UNIT Stops the operation in the conditions as per the following.
Seat belt unfastened
B2470:SYS HEAT PROTC DR Stops the operation in the conditions as per the following.
  • 1 time operation becomes possible after approximately 30 seconds
  • Returns to the initial condition after approximately 8 minutes
  • Emergency braking is applied
  • Intelligent brake assist is activated
  • Steering wheel is steered sharply
  • Seat belt fastened
  • Seat belt unfastened
  • Door opens
U0126:STRG ANG SEN SIG Stops the operation in the conditions as per the following.
  • Steering wheel is steered sharply
  • Seat belt unfastened
U0428:STRG ANGL CAL Stops the operation in the conditions as per the following.
  • Steering wheel is steered sharply
  • Seat belt unfastened
(1) The deactivation mode differs depending on the internal malfunctioning condition of control unit
scientia non olet · About Mike's Workshop Manuals