Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2010 >> EX35 Base, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transfer Case) >> On-Vehicle Repair >> AWD Control Unit >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the glove box assembly. Refer to "REMOVAL AND INSTALLATION ".
  2. Disconnect AWD control unit harness connector.
  3. Remove AWD control unit (1) mounting nuts.
  4. Remove AWD control unit.
    Fig 1: Identifying AWD Control Unit And Mounting Nuts
    G05218998Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals