Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2009 >> M45 Base >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> [5AT: Re5R05A] >> Service Information >> Shift Control System >> Adjustment of A/T Position >> AWD Models

AWD Models

  1. Loosen nut (2) of bracket (1).
  2. Place PNP switch and selector lever in "P" position.
  3. While pressing lower lever (3) toward rear of vehicle (in "P" position direction), tighten nut to specified torque. Refer to "CONTROL ROD REMOVAL AND INSTALLATION ".
    Fig 1: Identifying Nut, Pivot Pin And Lower Lever (AWD Models)
    G05213345Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals