Power Supply And Ground
WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
Power is supplied at all time
- Through 10A fuse [No. 19, located in fuse block (J/B)]
- To rear view camera control unit terminal 1.
When ignition switch is in ACC or ON position, power is supplied
- Through 10A fuse [No. 6, located in fuse block (J/B)]
- To rear view camera control unit terminal 2.
When ignition switch is in ON or START position, power is supplied
- Through 10A fuse (No. 83, located in IPDM E/R)
- To back-up lamp relay terminals 1 and 3.
Ground is supplied
- To rear view camera control unit terminal 3
- Through grounds M35, M45 and M85.