Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2009 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Driver Information System) >> Combination Meters >> Electrical Components Inspection >> ODO/Trip Meter And Illumination Control Switch

ODO/Trip Meter And Illumination Control Switch

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

Check continuity between terminals 25, 26, 35 or 36 and 27.

Fig 1: Identifying Continuity Between Terminals 25, 26, 35 Or 36 And 27
G05222310Courtesy of NISSAN MOTOR CO., U.S.A.
CONTINUITY SPECIFICATIONS

Terminal Condition Continuity
25 27 Illumination control switch (-) is pressed. Yes
Illumination control switch (-) is released. No
26 Illumination control switch (+) is pressed. Yes
Illumination control switch (+) is released. No
35 Trip transfer switch is pressed. Yes
Trip transfer switch is released. No
36 Trip reset switch is pressed. Yes
Trip reset switch is released. No