Inspection Procedure
WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
- PRESS "EJECT" AND CHECK OPERATION
- Press the CD eject switch in the display for 2 seconds or more and check that the CD ejects.
OK: CD ejects.
NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK: Go to Next Step
- Press the CD eject switch in the display for 2 seconds or more and check that the CD ejects.
- REPLACE CD WITH ANOTHER AND RECHECK
- Replace the CD with a normal one and check that the CD ejects.
OK: CD ejects.
NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK: CD IS FAULTY
- Replace the CD with a normal one and check that the CD ejects.