Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2009 >> M45 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 130 (Front Final Drive) >> Front Final Drive Assembly >> Disassembly and Assembly >> Disassembly >> Side Shaft Assembly

Side Shaft Assembly

WARNING: This page is about a different car, the 2008 Infiniti M45 and 2008 Infiniti M35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Hold extension tube retainer with puller, then press out side shaft using a press.
    Fig 1: Pressing Out Side Shaft
    G05225492Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Remove side shaft oil seal (1) from extension tube retainer with a flat- blade screwdriver.
    CAUTION: Be careful not to damage extension tube retainer.
  3. Remove side shaft bearing from extension tube retainer.
  4. Remove O-ring from extension tube retainer.
  5. Remove dust sealed from side shaft.
    Fig 2: Removing Oil Seal
    G05225493Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals