PCV Valve: Installation

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL VENTILATION VALVE SUB-ASSEMBLY
1. Apply adhesive to 2 or 3 threads.
  Adhesive:
  
  Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
  
  Fig 1: Applying Adhesive To Ventilation Valve Threads
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the ventilation valve.
  Torque: 27 N*m (275 kgf*cm, 20 ft.*lbf)