Inspection Procedure

WARNING: This page is about a different car, the 2008 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

When the transponder key ECU is replaced, reregister the ECU - ECM communication ID (see REGISTRATION ).

REREGISTER KEY
1. Clear the DTCs (see DTC CHECK/CLEAR ).
2. Reregister the key code with the transponder key ECU (see REGISTRATION ).
3. Check that the engine starts with the key.
  OK: Engine starts.
NG: REPLACE KEY

OK: END