Component Function Check
WARNING: This page is about a different variant/trim than selected.
- CHECK REFRIGERANT PRESSURE SENSOR FUNCTION
- Start engine and warm it up to normal operating temperature.
- Turn A/C switch and blower fan switch ON.
- Check the voltage between ECM harness connector terminals as per the following.
VOLTAGE REFERENCE
| ECM | Voltage (V) | ||
|---|---|---|---|
| Connector | + | - | |
| Terminal | Terminal | ||
| M107 | 105 (Refrigerant pressure sensor signal) | 112 | 1.0 - 4.0 |
Is the inspection result normal?
YES: INSPECTION END
NO: Go to "DIAGNOSIS PROCEDURE ".