Component Function Check
WARNING: This page is about a different variant/trim than selected.
- CHECK COOLING FAN FUNCTION
With CONSULT-III
- Turn ignition switch ON.
- Perform "FAN DUTY CONTROL" in "ACTIVE TEST" mode with CONSULT-III.
- Make sure that cooling fan speed varies according to the percentage.
Without CONSULT-III
- Perform IPDM E/R auto active test and check cooling fan motors operation, refer to "DIAGNOSIS DESCRIPTION ".
- Make sure that cooling fan operates.
Is the inspection result normal?
YES: INSPECTION END
NO: Go to "DIAGNOSIS PROCEDURE ".