Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2009 >> G37 Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Automatic Drive Positioner -- Convertible >> DTC/Circuit Diagnosis >> Power Walk-In Switch >> Component Function Check

Component Function Check

  1. CHECK FUNCTION
    1. Turn ignition switch ON.
    2. Select "WALK-IN SW" in the "Data Monitor" mode using CONSULT-III.
    3. Check the power walk-in switch signal under the following condition.
      POWER WALK-IN SWITCH SIGNAL CHECKING CONDITIONS

      Test item Condition Status
      WALK-IN SW Power walk-in switch Pressed ON
      Released OFF

      Is the indication normal? 

      YES: INSPECTION END

      NO: Perform diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About Mike's Workshop Manuals