DTC Detection Logic
NOTE:
- If DTC P0014 or P0024 is displayed with DTC P0078, P0084 first perform trouble diagnosis for DTC P0078, P0084. Refer to
"DTC LOGIC ".
- If DTC P0014 or P0024 is displayed with DTC P1078, P1084 first perform trouble diagnosis for DTC P1078, P1084. Refer to
"DTC LOGIC
".
DTC DETECTION CONDITION AND POSSIBLE CAUSES REFERENCE CHART
| DTC No. |
Trouble diagnosis name |
DTC detecting condition |
Possible cause |
| P0014 |
Exhaust valve timing (EVT) control performance (bank 1) |
There is a gap between angle of target and phase-control angle degree. |
- Crankshaft position sensor
- Camshaft position sensor
- EVT control position sensor
- EVT control magnet retarder
- Accumulation of debris to the signal pick-up portion of the camshaft
- Timing chain installation
- EVT control pulley assembly
|
| P0024 |
Exhaust valve timing (EVT) control performance (bank 2) |