DTC Detection Logic

NOTE: If DTC P0011 or P0021 is displayed with DTC P0075 or P0081, first perform the trouble diagnosis for DTC P0075, P0081. Refer to "DTC LOGIC ".

DTC DETECTION CONDITION AND POSSIBLE CAUSES REFERENCE CHART

DTC No.	Trouble diagnosis name	DTC detecting condition	Possible cause
P0011	Intake valve timing (IVT) control performance (bank 1)	There is a gap between angle of target and phase-control angle degree.	Crankshaft position sensor Camshaft position sensor IVT control solenoid valve Accumulation of debris to the signal pick-up portion of the camshaft Timing chain installation Foreign matter caught in the oil groove for intake valve timing control
P0021	Intake valve timing (IVT) control performance (bank 2)