FCW Initial State Change
CAUTION:
Never change FCW initial state "ON" => "OFF" without the consent of the customer.
FCW initial state can be changed.
- FCW initial ON* - FCW function is automatically turned ON, when the ignition switch OFF => ON.
- FCW initial OFF - FCW function is still OFF when the ignition switch OFF => ON.
*: Factory setting
How to change FCW initial state
- Turn ignition switch ON.
- Switch FCW and LDP functions to OFF.
- Push and hold FCW switch for more than 4 seconds.
- Buzzer sounds and blinking of the lane departure warning lamp informs that the FCW initial state change is completed.