Diagnostic Work Sheet

DIAGNOSTIC WORK SHEET

1	□ Read the item on cautions concerning fail-safe and understand the customer's complaint.				FAIL-SAFE
2	□ A/T fluid inspection, stall test and line pressure test
		□ A/T fluid leakage
		□ Stall test			STALL TEST
			□ Torque converter one-way clutch □ Front brake □ High and low reverse clutch □ Low coast brake □ Forward brake □ Reverse brake □ Forward one-way clutch	□ 1st one-way clutch □ 3rd one-way clutch □ Engine □ Line pressure low □ Except for input clutch and direct clutch, clutches and brakes OK
		□ Line pressure test - Suspected part:			LINE PRESSURE TEST
3	□ Perform self-diagnosis. - Check detected items to repair or replace malfunctioning part.				CONSULT-III FUNCTION (TRANSMISSION)
4	□ Perform road test.
	4-1	□ Check before engine is started			CHECK BEFORE ENGINE IS STARTED
	4-2	□ Check at idle			CHECK AT IDLE
	4-3	Cruise test		□ Part 1	CRUISE TEST - PART 1
				□ Part 2	CRUISE TEST - PART 2
				□ Part 3	CRUISE TEST - PART 3
	□ Check malfunction phenomena to repair or replace malfunctioning part after completing all road tests. Refer to "SYMPTOM TABLE ".
5	□ Drive vehicle to check that the malfunction phenomenon has been resolved.
6	□ Erase the results of the self-diagnosis from the TCM and the ECM.				ON BOARD DIAGNOSTIC (OBD) SYSTEM , ON BOARD DIAGNOSTIC (OBD) SYSTEM