Component Inspection

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DOOR KEY CYLINDER SWITCH

Turn ignition switch OFF.
Disconnect front door lock assembly (driver side) (key cylinder switch) connector.

Check front door lock assembly (driver side) (key cylinder switch).

CONTINUITY SPECIFICATION

Front door lock assembly (driver side) (key cylinder switch)			Key position	Continuity
Connector	Terminal		Key position	Continuity
D15	5	4	Unlock	Existed
	5		Neutral / Lock	Not existed
	6		Lock	Existed
	6		Neutral / Unlock	Not existed

Is the inspection result normal?

YES: INSPECTION END

NO: Replace front door lock assembly (driver side) (key cylinder switch). Refer to REMOVAL AND INSTALLATION .