Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2009 >> EX35 Base, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System >> Power Distribution System >> Component Diagnosis >> DTC B2615: Blower Relay Circuit >> Component Inspection

Component Inspection

  1. CHECK BLOWER RELAY
    1. Turn ignition switch OFF.
    2. Remove blower relay.
    3. Check the continuity between blower relay terminals.
      TERMINALS CONTINUITY REFERENCE CHART

      Terminals Condition Continuity
      3 and 5 12 V direct current supply between terminals 1 and 2 Existed
      No current supply Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace blower relay.

      Fig 1: Checking Continuity Between Blower Relay Terminals
      G04889520Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals