Removal and Installation of NAVI Control Unit: Removal

WARNING: This page is about a different car, the 2008 Infiniti FX45 and 2008 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

Remove passenger side seat. Refer to "REMOVAL AND INSTALLATION ".
Remove clips (4), and remove NAVI control unit cover.

Fig 1: Identifying NAVI Control Unit Cover And Clips
Courtesy of NISSAN MOTOR CO., U.S.A.
Remove screws (2) and nut (1) with power tool, and remove NAVI control unit.

Fig 2: Identifying NAVI Control Unit Screws And Nut
Courtesy of NISSAN MOTOR CO., U.S.A.
Remove screws (4) with power tool and remove brackets.

Fig 3: Identifying Brackets And Screws

Courtesy of NISSAN MOTOR CO., U.S.A.