Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2008 >> M35 Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (VQ35DE) - DTCS P0137 To P0448 >> DTC P0327, P0328: KS >> DTC Confirmation Procedure >> Testing Condition

Testing Condition

Before performing the following procedure, confirm that battery voltage is more than 10V at idle  .

  1. Start engine and run it for at least 5 seconds at idle speed.
  2. Check 1st trip DTC.
  3. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".