Diagnosis Mode For Consult-III

A current self-diagnosis results (also indicated with the number of warning lamp blinks in diagnosis mode) are displayed on CONSULT-III screen in real time. This refers to a malfunctioning part requiring repairs.

Diagnosis results previously stored in the memory are displayed on CONSULT-III screen. The stored results are not erased until memory erasing is executed.

With TROUBLE DIAG RECORD, diagnosis results previously erased by a reset operation can be displayed on CONSULT-III screen.

The diagnosis sensor unit for each vehicle model has its own individual classification number. This number will be displayed on CONSULT-III screen, as shown. When replacing the diagnosis sensor unit, refer to the part number for the compatibility. After installation, replacement with a correct unit can be checked by confirming this classification number on CONSULT-III screen.

After repair, check that the discriminated number of diagnosis sensor unit installed to vehicle are the same. Refer to "REMOVAL AND INSTALLATION ".