Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2008 >> G37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Engine Control System - DTCS P0643 To P2A03) >> P1554 Battery Current Sensor >> Overall Function Check >> With CONSULT-III

With CONSULT-III

WARNING: This page is about a different car, the 2008 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine and let it idle.
  2. Select "BAT CUR SEN" in "DATA MONITOR" mode with CONSULT-III.
  3. Check "BAT CUR SEN" indication for 10 seconds.

    "BAT CUR SEN" should be above 2, 300mV at least once. 

  4. If NG, go to , "DIAGNOSIS PROCEDURE ".
scientia non olet · About Mike's Workshop Manuals