Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2008 >> G37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Engine Control System - DTCS P0643 To P2A03) >> P1217 Engine Over Temperature >> Overall Function Check >> With CONSULT-III

With CONSULT-III

WARNING: This page is about a different car, the 2008 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the coolant level in the reservoir tank and radiator.

    Allow engine to cool before checking coolant level. 

    If the coolant level in the reservoir tank and/or radiator is below the proper range, skip the following steps and go to , "DIAGNOSIS PROCEDURE ".

    Fig 1: Identifying Coolant Level In Reservoir Tank
    G04875329Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Confirm whether customer filled the coolant or not. If customer filled the coolant, skip the following steps and go to , "DIAGNOSIS PROCEDURE ".
  3. Turn ignition switch ON.
  4. Perform "COOLING FAN" in "ACTIVE TEST" mode with CONSULT-III.
  5. If the results are NG, go to , "DIAGNOSIS PROCEDURE ".