CONFIGURATION : Special Repair Requirement

WARNING: This page is about a different car, the 2008 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

WRITING VEHICLE SPECIFICATION
Perform "WRITE CONFIGURATION" with CONSULT-III.

When writing saved data: GO TO 2

When writing manually: GO TO 3
PERFORM "WRITE CONFIGURATION - CONFIG FILE"
Perform "WRITE CONFIGURATION - Config file" with CONSULT-III.

WORK END
PERFORM "WRITE CONFIGURATION - MANUAL SELECTION"

For "WRITE CONFIGURATION - Manual selection", using the following flow chart, identify the correct model and configuration list.

Confirm and/or change setting value for each item according to the configuration list.

Depending on CONSULT-III software version being used, some or all of the write configuration items shown in the following configuration lists may be displayed. If an item does not display on the CONSULT-III "WRITE CONFIGURATION - Manual selection" screen, then it is an auto setting item and it cannot be manually set or changed.

MANUAL SETTING ITEM

Items

Setting value

KEYLESS ENTRY

WITH<=>WITHOUT

AUTO LIGHT

WITH<=>WITHOUT

FR FOG LAMP

WITH<=>WITHOUT

DTRL

WITH<=>WITHOUT

SPEED SENS WIP

WITH<=>WITHOUT

DISPLAY STYLE

MODE1⁽¹⁾<=>MODE2⁽²⁾

THEFT ALARM

WITH<=>WITHOUT

⁽¹⁾	Without NAVI

⁽²⁾

With NAVI

Do not apply MODE3 or MODE4

NOTE: Confirm vehicle model. Refer to "MODEL VARIATION ".

WORK END