Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2008 >> G37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Power Control System) >> Power Distribution System >> Component Diagnosis >> U1000 Can Comm Circuit >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2008 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM SELF DIAGNOSTIC
    1. Turn ignition switch ON and wait for 2 seconds or more.
    2. Check "SELF-DIAG RESULTS".

    Is "CAN COMM CIRCUIT" displayed? 

    Yes: Refer to "CAN COMMUNICATION CONTROL CIRCUIT ".

    No: Refer to "INTERMITTENT INCIDENT ".

scientia non olet · About Mike's Workshop Manuals