Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2008 >> G37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Security Control System) >> Component Diagnosis >> P1610 Lock Mode >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different car, the 2008 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK ENGINE START FUNCTION
    1. Perform the check for DTC except DTC P1610.
    2. Use CONSULT-III to erase DTC after fixing.
    3. Check that engine can start with registered mechanical key.

    Does the engine start? 

    Yes: INSPECTION END

    No: GO TO  2

  2. CHECK INTERMITTENT INCIDENT

    Refer to "INTERMITTENT INCIDENT ".

    INSPECTION END

scientia non olet · About Mike's Workshop Manuals