Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2008 >> G35 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Engine Control System - DTCS P1148 To P2A03) >> DTC P1554: Battery Current Sensor >> Overall Function Check >> With Consult-III

With Consult-III

WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine and let it idle.
  2. Select "BAT CUR SEN" in "DATA MONITOR" mode with CONSULT-III.
  3. Check "BAT CUR SEN" indication for 10 seconds.

    "BAT CUR SEN" should be above 2, 300mV at least once. 

  4. If NG, go to "DIAGNOSIS PROCEDURE ".
scientia non olet · About Mike's Workshop Manuals