Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2008 >> G35 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Power Window Control System) >> On-Vehicle Repair >> Rear Power Window Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear power window switch finisher (1) from the rear door finisher. Refer to "REMOVAL AND INSTALLATION ".
  2. Using a suitable tool (A), release the tabs and remove the rear power window switch (2).
    Fig 1: Removing Rear Power Window Switch Finisher
    G05382411Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About Mike's Workshop Manuals