Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2008 >> G35 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Ventilation System) >> On-Vehicle Repair >> Variable Blower Control >> Removal and Installation >> Front Variable Blower Control >> Removal

Front Variable Blower Control: Removal

WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the glove box assembly. Refer to "REMOVAL AND INSTALLATION ".
  2. Disconnect the variable blower control electrical connector.
  3. Remove the two screws and remove the variable blower control.
scientia non olet · About Mike's Workshop Manuals