Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2008 >> G35 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Brake Control System) >> Basic Inspection >> Inspection And Adjustment >> Additional Service When Replacing Control Unit >> ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement

WARNING: This page is about a different car, the 2008 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM THE NEUTRAL POSITION ADJUSTMENT FOR THE STEERING ANGLE SENSOR

    Perform the neutral position adjustment for the steering angle sensor.

    Refer to "ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION : SPECIAL REPAIR REQUIREMENT ", GO TO 2

  2. PERFORM CALIBRATION OF THE DECEL G SENSOR

    Perform calibration of the decel G sensor.

    Refer to "CALIBRATION OF DECEL G SENSOR : SPECIAL REPAIR REQUIREMENT ".