Component Inspection (ICC Brake Hold Relay)

1. Turn ignition switch OFF.
2. Remove ICC brake hold relay.
3. Check the continuity between ICC brake hold relay terminals under the following conditions.
   TERMINALS CONTINUITY REFERENCE
   
   

   Terminals	Condition	Continuity
   3 and 5	12V direct current supply between terminals 1 and 2	Existed
   	No current supply	Not existed

Is the inspection result normal? 

YES: INSPECTION END

NO: Replace ICC brake hold relay

Fig 1: Identifying ICC Brake Hold Relay Terminals

Courtesy of NISSAN MOTOR CO., U.S.A.